Component · Toggles

Tactile lever toggle switches

by Informeek Studio 15 November 2026
Live Flick a lever, or drag it past the click

The prompt

Create three physical lever toggle switches on the panel of an espresso machine called Merla. Warm beige page (#e6ddcf). A brushed steel plate made from a 3px repeating stripe over a #d9dce0 to #a9aeb5 gradient, 30px corners, a cream enamel rim, four screws and a cup tray above. Top row: the engraved MERLA wordmark, "Duetto 2, dual boiler", a status line with a coloured dot, and a 112px pressure gauge drawn in SVG with 0 to 12 bar ticks, a green 8 to 10 zone and a red needle on a damped spring with a small pump wobble. Below, three switches (Power, Steam, Cup warmer), each a role switch button with an amber pilot lamp, ON and OFF engraving, a ringed chrome nut and a bat lever rotated with rotateX in 260px perspective, 28deg for on and 152deg for off, with a moving blurred shadow. Clicking snaps over 320ms with cubic-bezier(.3,1.7,.5,1). Dragging feels stiff until 26px, then snaps through. On every snap the plate jolts 1.5px for 190ms, the nut squashes and the lamp flickers on, with a 12ms vibration where supported. Power warms the boiler to 93°C and lifts the needle to 9 bar; Steam puffs steam above the machine; Cup warmer tints the tray and raises heat lines. Fit 390 by 504 on phones; reduced motion drops the particles.

Written by Informeek Studio to recreate this design. Prompts are not deterministic, so running it again gives a similar result, not an identical one.

Use it in three steps

  1. Copy the prompt with the button above.
  2. Paste it into your AI site builder, or any AI chat that writes code.
  3. Make it yours by relabelling the levers and lamps for your own hardware.

About this toggle switch animation

Most switches on screen are a dot sliding in a pill. This toggle switch animation goes the other way and copies a real one: a chrome bat lever on a ringed nut, set into a brushed steel panel from an espresso machine. The lever tips over in 3D perspective and casts a soft shadow that moves with it, so up and down read clearly from across the room.

The feel comes from the details around the snap. Drag a lever and it resists, barely moving, until you pass a small detent and it jumps through. At that moment the whole panel jolts a pixel and a half, the nut squashes, the amber lamp flickers on and, on phones that allow it, a tiny vibration fires. Nothing makes a sound, yet it feels like a click. The switches do real work too: Power warms the boiler and lifts the gauge, Steam sends up puffs and the cup warmer heats the tray.

Why the prompt works

  • It gives the angles and perspective, so the lever looks solid.
  • It describes the detent, stiff until 26px, then a snap.
  • It lists every part of the snap, jolt, squash, flicker and vibration.
  • It wires switches to results, a gauge, a status line and steam.

Where to use it

Smart home panels, product pages for appliances, audio gear, game settings and any place a setting deserves to feel like hardware.

The prompt is shared under CC BY 4.0. Reuse it freely, including commercially, with a credit linking back to this page.

Keep exploring

More prompts like this

See the collection →
Live
Component · Toggles

Day and night toggle with a changing scene

Live
Component · Cursor effects

Brushed velvet line animation

Live
Component · Interactive components

Bouncing balls animation for dog toys