Section · Hero sections

3D product hero for an insulated flask

by Informeek Studio 15 November 2026
Live Drag the flask, then try Hot and a new colour

The prompt

Build a 3D product hero for a flask brand called Oxlade with three.js 0.160 as an ES module. Make the flask from LatheGeometry: a powder coated body (roughness 0.62), a polished steel neck band (metalness 1, roughness 0.22) and a charcoal cap with 24 grip ridges and a half torus loop. Print "OXLADE" vertically on a thin transparent sleeve. Light it with a PMREM environment from a small box room plus one key light, with a soft radial shadow underneath. The flask bobs 0.07 units on a sine, turns slowly after 2s idle, spins with inertia when dragged, tilts towards the mouse and answers the arrow keys. Behind it sits a huge outlined word, COLD or HOT. A Cold and Hot toggle swaps the word, the temperature chip ("4°C after 24 hours" or "68°C after 12 hours") and a 2D canvas behind the model, with falling frost dots for cold and soft steam puffs rising from the cap for hot. Four 44px colour swatches, Fjord #3c6e8f, Moss #5f7a4a, Clay #c46a4a and Chalk #e9e4da, ease the coat colour and tint the page background over 0.8s. Copy on the right, "Hot for twelve hours, cold for a whole day", a price and two buttons. On phones put the model first at 330px tall with one chip. Reduced motion stops the bob and the particles. Show an SVG flask if WebGL fails.

Written by Informeek Studio to recreate this design. Prompts are not deterministic, so running it again gives a similar result, not an identical one.

Use it in three steps

  1. Copy the prompt with the button above.
  2. Paste it into your AI site builder, or any AI chat that writes code.
  3. Make it yours by changing the lathe profile and colours to match your own product.

About this 3D website design

The best 3D website design puts the product in the hero and lets people handle it. Here a steel flask built in three.js floats beside the headline, bobbing gently and turning on its own until someone grabs it. Drag sideways and it spins with a little inertia; move the mouse and it leans towards you. The whole model is made from turned profiles, so there are no files to download and it loads quickly.

The two controls tell the story. The Cold and Hot switch changes the huge outlined word behind the flask, the temperature claim on the chip and the weather on the page: frost drifting down for cold, soft steam rising from the cap for hot. The colour swatches repaint the powder coat and tint the page background to match, so each colourway gets its own mood.

Why the prompt works

  • It builds the model from lathe profiles, which is how bottles are really shaped.
  • It asks for a generated environment, so the steel band has something to reflect.
  • It links the toggle to the scene, word, chip and particles all change.
  • It plans for failure, with an SVG fallback and a calm reduced motion version.

Where to use it

Drinkware, cosmetics, audio, homeware and any product launch with a simple, round object that looks good from every side.

The prompt is shared under CC BY 4.0. Reuse it freely, including commercially, with a credit linking back to this page.

Keep exploring

More prompts like this

See the collection →
Live
Section · Hero sections

SaaS hero section with drifting gradient

Live
Component · Cursor effects

Brushed velvet line animation